Agilent Technologies B2200A, B2201A manual ROUTeSYMBolCHANnel

SCPI Command Reference [:ROUTe]:SYMBol:CHANnel

[:ROUTe]:SYMBol:CHANnel

In the GPIB local mode, the B2200 uses 01 to 48 (two digits numbers) to specify the output ports (channels) 1 to 48 respectively. This command specifies a symbol string and lets the B2200 use the specified string instead of the two digits number. The query returns the symbol string.

Maximum value of the two digits number depends on the B2200 configuration. It is 12 for the normal configuration mode or the auto configuration mode with one matrix card, 24 for the auto configuration mode with two matrix cards, 36 for the auto configuration mode with three matrix cards, or 48 for the auto configuration mode with four matrix cards.

Reboot, *RST, and :SYSTem:CPON clear the symbol strings. After that, the initial symbol string (two digits numbers 01 to 48) will be set.

Syntax	[:ROUTe]:SYMBol:CHANnel card_number,channel_number,'string'
	[:ROUTe]:SYMBol:CHANnel? card_number,channel_number
	Parameter	Explanation
	card_number	For Auto Config mode: 0 or ALL
		For Normal Config mode: 1, 2, 3, 4, or ALL
		ALL is not available for query.
	channel_number	Output port number: 1 to 48 for Auto, 1 to 12 for Normal.
	string	Symbol string set to the specified output port (channel).
		Maximum 6 characters.
		Numeric characters, alphabetic characters; upper case and
		lower case, space, and the following symbols are available.
		! " # $ % & ’ ( ) * + , - . / > ? : ~ ; < = > ? @ [ \ ] ‘ { } ^ _
Query response	string <newline><^END>
Example	OUTPUT @Agb2200;":ROUT:SYMB:CHAN 0,10,'GATE'"
	OUTPUT @Agb2200;":ROUT:SYMB:CHAN? 0,10"
	ENTER @Agb2200;A$

This example assigns the string instead of 10. In this example,

GATE to the output port 10. After that, GATE is used A$ will be GATE.

5-42 Agilent B2200 User’s Guide, Edition 2