Agilent Technologies B2200A, B2201A manual DIAGnostic, ROUTe, SYSTem

SCPI Command Reference

This chapter describes the following for Agilent B2200:

•SCPI commands available to control the B2200 via GPIB interface.

SCPI is a universal programming language for electronic test and measurement instruments, and is based on IEEE 488.1 and IEEE 488.2.

SCPI commands are divided into two types: common commands and subsystem commands.

Common commands are generally not measurement related, but are used to manage status registers, data storage, and so on. Common commands are defined by IEEE 488.2. All common commands begin with an asterisk, such as *RST.

Subsystem commands are mostly measurement related and some are general purpose. Subsystem commands have a hierarchical structure that uses a colon between mnemonics (keywords), such as :DIAG:TEST:CARD:CLE.

Commands for the following subsystems are available for the B2200:

DIAGnostic	commands for performing self-test.
ROUTe	commands for signal routing.
SYSTem	commands for controlling other functions that are not related
	to instrument performance.

Commands are listed in alphabetical order in this chapter.

•Status reporting structure

These are IEEE 488.2 status structures (registers), which can be set or read by the common commands.

5-2 Agilent B2200 User’s Guide, Edition 2