Agilent Technologies B2201A, B2200A manual Led

		Front Panel Operation
		Setup Menus
LED	Displays the sub menu that provides the following functions.
	• EXECUTE
	Starts the LED matrix test, and displays the following message.
	DIAG:LED	All LED in Orange?

Press the Enter key if the all LEDs are lighted in orange. The test result will be recorded as PASS.

If you find any problem, press the Exit key. The test result will be recorded as

FAIL.

		Finally, press the Exit key to return to the previous menu.
	•	RESULT
		Displays the test result. Press the Exit key to return to the previous menu.
PEN	Displays the sub menu that provides the following functions.
	Before starting the light pen test, connect the light pen to the Agilent B2200.
	•	EXECUTE
		Starts the light pen test, and displays the following message.
		DIAG:PEN	Point any cross point

Point the light pen to the point you desire and confirm the LCD display. For example, if you point the input 5-to-output 10 cross point of the Agilent B2200 in the auto configuration mode, the following message must be displayed.

SLOT: 0 INPUT: 5 OUTPUT:10

Continue this for all cross points. After that, press the Enter key for the normal operation. The test result will be recorded as PASS.

If you find any wrong response, press the Exit key. The test result will be recorded as FAIL.

Finally, press the Exit key to return to the previous menu.

•RESULT

Displays the test result. Press the Exit key to return to the previous menu.

Agilent B2200 User’s Guide, Edition 2 3-37