SCPI Command Reference [:ROUTe]:CLOSe:CARD?

[:ROUTe]:CLOSe:CARD?

This query command returns channel_list of all closed (connected) channels for the specified card.

Syntax

[:ROUTe]:CLOSe:CARD? card_number

 

Parameter

Explanation

 

 

 

 

card_number

For Auto Config mode: 0

 

 

For Normal Config mode: 1, 2, 3, or 4

Query response

channel_list <newline><^END>

Example

OUTPUT @Agb2200;":ROUT:OPEN:CARD ALL"

 

OUTPUT @Agb2200;":ROUT:CLOS (@10101,10202)"

 

OUTPUT @Agb2200;":ROUT:CLOS:CARD? 1"

 

ENTER @Agb2200;A$

 

 

A$ will be @10101,10202. For channel_list, see “Switch Control” on page 4-5.

[:ROUTe]:CLOSe[:LIST]

This command connects the input ports to the output ports (channels) as specified in channel_list. The query returns 0 or 1 for each channel specified by channel_list, in same order as specified by channel_list.

For some modes (such as Single Route Mode, Couple Mode, Ground Mode, and

Bias Mode), more complex connections may occur.

Syntax

[:ROUTe]:CLOSe[:LIST] (@channel_list)

 

[:ROUTe]:CLOSe[:LIST]? (@channel_list)

 

 

 

 

Parameter

Explanation

 

 

 

 

channel_list

Channels to close or to check.

 

 

For channel_list, see “Switch Control” on page 4-5.

 

 

 

Query response

close_status{, close_status} <newline><^END>

 

1: closed

 

 

0: opened

 

5-34

Agilent B2200 User’s Guide, Edition 2

Page 160
Image 160
Agilent Technologies B2200A, B2201A manual ROUTeCLOSeCARD?, ROUTeCLOSeLIST