Agilent Technologies B2201A, B2200A manual Agb220xabiasPort, Agb220xabiasState

		VXI plug&play Driver
		Driver Functions
	agb220xa_biasPort
	This function will select which input port is the bias port on the specified card. For
	each card, you can specify the same or different bias port.
Syntax	ViStatus _VI_FUNC agb220xa_biasPort(ViSession vi, ViInt16 bport_cardno,
	ViInt16 bias_port);
Parameters	vi	Instrument handle returned from agb220xa_init( ).
	bport_cardno	Card number. 1 (card 1), 2 (card 2), 3 (card 3), 4 (card 4), or 5
		(all card) in the normal configuration mode, or 0 (all card in the
		auto configuration mode). For the configuration mode, see
		agb220xa_func.
	bias_port	Input port number to be set to the bias port. 1 to 14 (input port 1
		to input port 14).
	If the bias input port and a couple port have been assigned to the same input port, the
	bias mode and the couple mode cannot be used in parallel.
	agb220xa_biasState
	This function controls the bias mode for the specified card. When bias mode is ON,
	the input bias port is connected to all bias enabled output ports that are not
	connected to any other input ports. Bias disabled output ports are never connected to
	the input bias port when bias mode is ON.
	The bias mode cannot be set to ON when the ground mode is ON.
Syntax	ViStatus _VI_FUNC agb220xa_biasState(ViSession vi, ViInt16 bstate_cardno,
	ViInt16 state);
Parameters	vi	Instrument handle returned from agb220xa_init( ).
	bstate_cardno	Card number. 1 (card 1), 2 (card 2), 3 (card 3), 4 (card 4), or 5
		(all card) in the normal configuration mode, or 0 (all card in the
		auto configuration mode). For the configuration mode, see
		agb220xa_func.
	state	Bias mode. 0 (OFF) or 1 (ON).

Agilent B2200 User’s Guide, Edition 2 6-9