1-101
Making Measurements
Using Test Sequencing
3. To move the cursor to the command that you wish to delete, press:
or
• If you wish to scroll through the sequence without executing each line as you do so,
you can press the key and scroll through the command list ba ckward s.
• If you use the key to move the cursor through the list of commands, the
commands are actually performed when the cursor points to them. This feature
allows the sequence to be tested one command at a time.
4. To delete the selected command, press:
(backspace key)
5. Press to exit the modify (edit) mode.
Inserting a Command
1. To enter the creation/editing mode, press:
2. To select the particular test sequence you wish to modify (sequence 1 in this example),
press:
3. To insert a command, move the cursor to the line immediately above the line where you
want to insert a new command, by pressing:
or
• If you use the key to move the cursor through the list of commands, the
commands are actually performed when the cursor points to them. This feature
allows the sequence to be tested one command at a time.
• If you wish to scroll through the sequence without executing each line as you do so,
you can press the key and scroll through the command list ba ckward s.
4. To enter the new command, press the corresponding analyzer front panel keys. For
example, if you want to activate the averaging function, press:
5. Press to exit the modify (edit) mode.
Modifying a Command
1. To enter the creation/editing mode, press:
2. To select the particular test sequence you wish to modify, (sequence 1 in this example),
press:
Seq
DONE SEQ MODIFY
Seq
NEW SEQ/MODIFY SEQ
SEQUENCE 1 SEQ1
Avg
AVERAGING ON
Seq
DONE SEQ MODIFY
Preset Seq
NEW SEQ/MODIFY SEQ
SEQUENCE 1 SEQ1