Agilent Technologies To Activate Display Markers

1-25
Making Measurements
Using Markers
NOTE Using will also affect marker sea rch and positioning
functions when the value entered in a search or positioning function does not
exist as a measurement point. The marker will be positioned to the closest
adjacent point that satisfies the search or positioning value.
To Activate Display Markers
• To switch on marker 1 and make it the active marker, press:
The active marker is identified on the analyzer display with the following symbol: ∇
The active marker stimulus value is displayed in the active entry area. You can modify
the stimulus value of the active marker, using the front panel knob or numerical
keypad. All of the marker response and stimulus values are displayed in the upper r ight
corner of the display.
Figure 1-12 Active Marker C ontrol Example
To switch on the corresponding marker and make it the active marker, press:
, , or
All of the markers, other than the active marker, become inactive and are represented on
the analyzer display as ∆. The active and inactive markers are shown in Fig ure 1-13.
MARKERS: DISCRETE
Marker
MARKER 1
MARKER 2
MARKER 3
MARKER 4
MARKER 5