4-46
Printing, Plotting, and Saving Measurement Results
Saving Measurement Results
Saving in Graphical (JPEG) Form
Graphical measurement results can be saved in JPEG format and used as an illustration
in a text editor or desktop publishing application.1 Up to eight traces may be saved in the
JPEG file. This is done by storing a measurement using and turning
on for each of the four channels.
1. Press .
2. Make sure that is displayed.
3. Make sure that is underlined. If it is not underlined, press the
softkey so that GRAPHIC is underlined.
4. Insert a 3.5-inch floppy disk in the network analyzer’s disk drive.
5. Press to save the display as a graphic in the JPEG format.
The graphic file may be retrieved from the floppy disk on personal computer and can be
imported into an application that accepts graphics in the JPEG format.
NOTE When saving measurement results graphically, make sure that no onscreen
measurement data is displayed as white. Since media color is often white, any
measurement data printed using white will not be visible.
You may change the analyzer to the factory default color settings by pressing
to correct this problem.
However, to maintain your current color settings (except white), check the
measurement color settings by pressing
. Press to check the remaining measurement
colors. To modify any of the measurement colors, select the measurement and
then choose another color from the list of colors that is displayed.
1. The network analyzer firmware is based in part on the work of the Independent JPEG Group.
DATA
→
MEMORY
DATA AND MEMORY
Save/Recall
SAVE FILE FORMATS
GRAPH FMT [JPG]
FILETYPE: GRAPHIC
SAVE FILE
Copy
DEFINE PRINT
DEFAULT PRNT SETUP
Copy
PRINT COLORS
MORE