4-34
Printing, Plotting, and Saving Measurement Results
Printing or Plotting the List Values or Operating Parameters
Printing or Plotting the List Values or Operating Param eter s
Press and select the information that you want to appear on your hardcopy.
• Choose if you want a tabular listing of the measured data points, and
their current values, to appear on your hardcopy . This list wi ll also i nclude the limit t est
information, if you have the limits function activated.
• Choose if you want a tabular listing of the parameters for both
measurement channels to appear on your hardcopy. The parameters include: operating
parameters, marker parameters, and system parameters that relate to the control of
peripheral device s.

If You Want a Single Page of Values

1. Choose for a printer or for a plotter peripheral, to
create a hardcopy of the displayed page of listed values.
2. P ress to display the next page of listed values. Press
to display the previous page of listed values. Or, you can press or
repeatedly to display a particular page of listed values that you
want to appear on your hardcopy. Then repeat the previous step to create the hardcopy.
3. Repeat the previous two steps until you have created hardcopies for all the desired
pages of listed values.
If you are printing the list of measurement data points, each page contains 30 lines of data.
The number of pages is determined by the number of measurement points that you have
selected.

If You Want the Entire List of Values

Choose to print all pages of the listed values.
NOTE If you are printing the list of operating parameters, only the first four pages
are printed. The fifth page, system parameters, is printed by displaying that
page and then pressing .
Copy
LIST
LIST VALUES
OP PARMS (MKRS etc)
PRINT MONOCHROME
PLOT
NEXT PAGE
PREVIOUS PAGE
NEXT PAGE
PREVIOUS PAGE
PRINT ALL