1-105
Making Measurements
Using Test Sequencing
Printing a Sequence 1. Configure a compatible printer to the analyzer. (Refer to the “Options and Accessories”
chapter of the reference guide.)
2. To print a sequence, press:
and the softkey for the desired sequence.
NOTE If the sequence is on a disk, load the sequence (as described in a previous
procedure) and then follow the printing sequence.
In-Depth Sequencing Information Features That Operate Differently When Executed in a Sequence
The analyzer does not allow you to use the following keys in a sequence:
and keys
key, and
(backspace key)
Commands That Sequencing Completes Before the Next Sequence Command
Begins
The analyzer completes all operations related to the following commands before continuing
with another sequence command:
• single sweep
• number of groups
• auto scale
• marker search
• marker function
• data (→) memory
• recall or save (internal or external)
• copy list values and operating parameters
• CHAN1, CHAN2, Wait 0*
*Wait 0 is the special sequencing function with a zero entered for the delay value.
Seq
MORE
PRINT SEQUENCE
Preset
WAIT x