4-33
Printing, Plotting, and Saving Measurement Results
Configuring the Analyzer to Produce a Time Stamp
Configuring the Analyzer to Produce a Time Stamp
You can set a clock, and then activate it, if you want the time and date to appear on your
hardcopies.
1. Press .
2. Press and enter the current year, followed by .
3. Press and enter the current month of the year, followed .
4. Press and enter the current day of the month, followed by .
5. Press and enter the current hour of the day (0-23), followed by .
6. Press and enter the next immediate minute, followed by .
7. Press when the current time is exactly as you have set it.
8. Press until appears on the softkey label.
Aborting a Print or Plot Process
1. Press the key to stop all data transfer.
2. If your peripheral is not responding, press again or reset the peripheral.
System
SET CLOCK
SET YEAR
x1
SET MONTH
x1
SET DAY
x1
SET HOUR
x1
SET MINUTES
x1
ROUND SECONDS
TIME STAMP
Local
Local