8-4
Safety and Regulatory Information
Safety Symbols
Safety Symbols The following safety symbols are used throughout this manual. Familiarize yourself with
each of the symbols and its meaning before operating this instrument.
CAUTION Caution denotes a hazard. It calls attention to a procedure that, if not
correctly performed or adhered to, would result in damage to or destruction of
the instrument. Do not proceed beyond a caution note until the indicated
conditions are fully understood and met.
WARNING Warning denotes a hazard. It calls attention to a procedure which, if
not correctly performed or adhered to, could result in injury or loss
of life. Do not proceed beyond a warning note until the indicated
conditions are fully understood and met.
Instrument Markings The instruction documentation symbol. The product is marked with this
symbol when it is necessary for the user to refer to the instructions in the
documentation.
The CE mark is a registered trademark of the European Community. (If
accompanied by a year, it is when the design was proven.)
The CSA mark is a registered trademark of the Canadian Standards
Association.
This is a symbol of an Industrial Scientific and Medical Group 1 Class A
product.
The C-Tick mark is a registered trademark of the Australian Spectrum
Management Agency.
ICES / NMB-001 This is a marking to indicate pr oduct compliance with the Canadian
Interference-Causing Equipment Standard (ICES-001).