1-22
Making Measurements
Using Display Functions
Adjusting the Colors of the Display
Setting Display Intensity
To adjust the intensity of the display, press
and rotate the front panel knob, use the ( ) ( ) keys, or use the numerical keypad
to set the intensity value between 50 and 100 percent. Lowering the intensity may prolong
the life of the LCD.
Setting Default Colors
To set all the display elements to the factory-defined default colors, press
.
NOTE does not reset or change colors to the default color values. However,
cycling power to the instrument will reset the colors to the default color
values.
The Modify Colors Menu
The softkey within the adjust display menu provides access to the
modify colors menu.
The modify colors menu allows you to adjust the colors on your analyzer’s display. The
default colors in this instrument were chosen to maximize your ability to discern the
difference between the channel colors, and to comfortably and effectively view the colors.
Each channel’s memory trace color was chosen because the color is similar to the channels
data trace color. This allows easy association between the data trace and the memory trace
for each channel.
You may choose to change the default colors to suit environmental needs, individual
preferences, or to accommodate color deficient vision. You can use any of the available
colors for any of the display elements listed:
To change the color of a display elements, press the softkey for that element (such as
). Then press and turn the analyzer front panel knob; use the step keys
or the numeric keypad, until the desired color appears.
Display
ADJUST DISPLAY
INTENSITY
DEFAULT COLORS
Preset
MODIFY COLORS
CH1 DATA/LIMIT LN
CH3 DATA/LIMIT LN
CH1 MEM
CH3 MEM
CH2 DATA/LIMIT LN
CH4 DATA/LIMIT LN
CH2 MEM
CH4 MEM
GRATICULE
TEXT
WARNING
CH1 DATA
TINT