Alliance Laundry Systems Emergency Stop Button, Wet Clean Features, Wet Clean Capabilities, Differences in WE6 prompt (setup) options

Emergency Stop Button

On 135-pound capacity models, a red emergency stop button is located on the upper right-hand corner of the control panel. On 250-pound capacity models, the emergency stop button is on the left side of the washer- extractor front. Push the button in to stop the washer- extractor. Pull out to reset.

Wet Clean Features

The washer-extractor is equipped with the following wet clean capable features: One-half wash speed allows gentle mechanical action during wash. Eight supply signals provide not only normal laundering signals to dispense detergents, bleaches, softeners, sours, etc., but also chemicals unique to wet clean processing.

Operation

Wet Clean Capabilities

Differences in WE6 prompt (setup) options

The WE6FRWC software provides the usual setup options:

●Degrees F / C

●One or Two drain

●Advance / No Advance

●Manual / No Manual

●Balance setting

In addition, the software provides Wet Clean / No Wet Clean. The Wet Clean / No Wet Clean option enables or disables wet clean functions. The prompt (setup) options are now as follows:

●CEN / FAR

●1DRAIN / 2DRAIN

●ADV / NO ADV

●MANUAL / NO MAN

●WET CL / NO WCL

●BAL SW, BAL 1, BAL 2, BAL 3

F232101 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 17