Alliance Laundry Systems Operational Keypad, Key, Stop, Start, Error, Manual, Advance, Operation, Description, Display Temp, Recovery Routine, Operational Keypad

Operation

Operational Keypad

The computer’s control keypad includes sixteen keys. Refer to Figure 7. Fourteen of these keys list functions printed in black lettering on a silver background.

These functions are available to the operator and are intended to control operation of the washer-extractor. Refer to Table 2.

	Operational Keypad
Key	Description
Numbers 0 – 9	Press to select cycle number
Display Temp	Press and hold. Display will show and update sump temperature in degrees Fahrenheit or Centigrade.
Advance	Press to cause computer to skip to the next step in the cycle. The computer will not advance past drain
	step. (The Advance key is enabled at the factory and can be disabled at the laundry site.)
Stop	Press to immediately abort the cycle and initiate the Stop routine
Start	Press to start selected cycle or to re-start a step following a “FILL” or “EMTY” alarm. Refer to Error
	Recovery Routine in this section of the manual.
Manual	Refer to Manual Mode Control Feature at the end of this section.

Table 2

22 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232101