Programming

9.If no other supply is required, the next step is to choose the type of wash desired and assign it a time. For example, one might choose a wash with standard reversing action (Wash 1) and a time of six minutes.

a.Press the Wash key and then key 1. The display will read “W10339”.

b.Press the Enter key. The display will read “M---S”.

c.Press key 6. The display will read

“6M-00S”, indicating a wash step of six minutes.

10.Press the Enter key. The display will read“0439”, indicating that the computer is ready for step 4.

11.A drain step usually comes next.

a.Press the Drain key. The display will read “D-0439”. This program allows a choice among drains 1, a, or b. For this application, press key 1. The display will read “D10439”.

b.Then press the Enter key. The display will read “M---S”.

c.Enter the maximum time desired for the computer to allow the machine to drain to empty. The recommended time is one minute. Press key 1, and the display will change to “1M-00S”, indicating a drain step of one minute.

NOTE: The manufacturer does not recommend more than one minute for a drain step. If the machine does not drain in the amount of time programmed, the “EMTY” alarm will be displayed.

12.Press the Enter key. The display will now read “0539”, indicating that the computer is ready for step 5.

13.A natural next step in the cycle might be a dilution rinse.

a.Press the Cold and High keys to program a cold fill to high level. The display will read “CH0539”.

b.Press the Enter key. The display will read “M---S”.

c.Enter the desired time for the computer to allow the machine to fill to high level. Five minutes is acceptable. Press key 5. The display will read “5M-00S”.

NOTE: If the machine does not fill in the amount of time programmed, the “FILL” alarm will be displayed.

14.Press the Enter key. The display will read

“0639”, indicating that the computer is ready for step 6.

15.Next, program another wash step:

a.Press the Wash key and key 1 to program an action with normal reversing. The display will read “W10639”.

b.Press the Enter key. The display will read “M---S”.

c.Now enter the step duration. Three minutes is acceptable. Press key 3. The display will read “3M-00S”.

16.Press the Enter key. The display will read

“0739”, indicating that the computer is ready for step 7.

38

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

F232101