Alpine MDA-W890 owner manual Subwoofer On and Off, Basic Operation English, Sub-W ON, Sub-W OFF

				Basic OperationEnglish
				Subwoofer On and Off
				This unit is not equipped with a low pass filter.
				Turn on the Subwoofer Output when an
				amplifier having the built-in filter is connected to
				drive your subwoofer.
	1
1	MODE	SUB W.	Sub-W ON	Press and hold the SUB W. button for at least 3
				seconds.
			Sub-W OFF	With each press, Subwoofer is toggled On or
				Off.
				Notes:
				• Initial mode is "Sub-W OFF."
				• Leave the "Sub-W OFF" as long as the
				Subwoofer output is not being used.
				• When the subwoofer is turned on, the
				subwoofer output level can be adjusted. For
				more details, refer to the Adjusting Volume/
				Balance/Fader section on page 28.

18