Alpine MDA-W890 owner manual Titling. Pressing the Title button after entering

		CD Operation	English
		Titling Disc (Continued)
	5.&
5		Press the TITLE button to store the first
	TITLE	character. The first character will stop blinking
	AL	and the display will automatically advance to
	CLK	the next character. When that character begins
		to blink, you may choose the next letter or
		symbol of your title.
6		Repeat the steps 3 – 5 above to complete the
		titling. Pressing the TITLE button after entering
		the 12th character, automatically stores the title
		into memory.

7

In case of storing a title of less than 12 characters:

For example, after 3rd digit character is completed, 4th digit character is blinking. Then, go to step 7 .

	Press and hold the TITLE button for at least 3
TITLE	seconds to record the title.
	Notes:
CLK
	• You can not enter a title in clock mode. For
	the clock display, refer to “Displaying Time”,
	on page 110.

•When the title is not entered, “3DISC” or “CD CHANGER” will be displayed.

•When the display shows "Full Data", the memory is full and no input is accepted. In order to input new titles, old titles must be deleted first. Refer to the section "Erasing Disc Title" on page 68 to delete titles.

•The 3D Shuttle can memorize up to 18 CD titles maximum.

•The CD Shuttle title length or memory capacity depends upon the model being used.

•In the case of the 3D Shuttle, the memorized titles will be erased if the battery power lead is disconnected, keep this in mind when touching power cables.

66