CHAPTER 3
Controls
Standard Newton Buttons 3-27
Filing Button 3
A Filing button lets users designate a folder and a storage location (if more
than one is available) for data that’s currently displayed. How much data is
affected depends on where the Filing button is located. If the Filing button is
on a status bar, it affects all the data in the main view or all the selected items
in an overview. If the Filing button is on a separator bar, it affects the
information between that separator bar and the next one. If the Filing button
is in a slip, it affects all the information in the slip. A Filing button goes to the
left of an Action button near the right end of a status bar; at the right end of a
separator bar; or in the lower right corner of a slip. Figure 3-29 shows Filing
buttons on a status bar, on a separator bar, and in a slip.
Figure 3-29 Where a Filing button goes
Tapping a Filing button brings up a Filing slip. The slip lists the storage
locations currently available, such as the internal store and a named card
store. The slip also lists the folders defined for the current application, and
has buttons for editing the existing folder names or creating new folders.
Tapping a Filing button brings up a Filing slip, which is described in “Filing
Button and Slip” on page 8-14. For general information about filing, see
“Filing” on page 8-13.
By looking at a Filing button for a particular data item, users can tell whether
the current item is stored internally or on a card. If the item is stored on a
F
iling button on a
s
eparator bar
F
iling button in a
s
lip
F
iling button on a
s
tatus bar