If you can’t eject a card
If you are unable to eject a card, follow these steps:
1Straighten one end of a paper clip.
2Insert the end of the straightened paper clip into the hole next to the slot that contains the card, and press gently but firmly until the card is ejected.
If you can’t eject a card, insert the end of a straightened paper clip into the hole next to the slot. This hole is for the upper slot.
This hole is for the lower slot.
3 Pull the card out of the slot.
Setting the computer not to eject storage PC Cards at startup
If a you have a storage PC Card, such as an SRAM card or an ATA hard disk, in either slot, the card will be ejected when the computer starts up. To prevent excessive wear on PC Card connectors and slots, you can use the Startup Disk control panel to keep storage PC Cards from ejecting when you turn on the computer. (Other types of PC Cards, such as a modem or Ethernet card, are not ejected at startup.)
