Handling your computer equipment
Follow these guidelines for handling your computer and its components:
mWhen setting up your computer, place components on a sturdy, flat surface, and carefully follow all setup instructions.
mWhen connecting or disconnecting a cable, always hold the cable by its connector (the plug, not the cord).
mTurn off your computer and all its components before connecting or disconnecting any cables to add or remove any component. Failure to do so could seriously damage your equipment.
mNever force a connector into a port. If the connector and port do not join with reasonable ease, they probably don’t match. Make sure that the connector matches the port and that you have positioned the connector correctly in relation to the port.
mTake care not to spill any food or liquid on the computer, keyboard, mouse, or other components. If you do, turn your computer off immediately and unplug it before cleaning up the spill. Depending on what you spilled and how much of it got into your equipment, you may have to bring your equipment to an
mProtect the computer and its components from direct sunlight and rain or other moisture.
mKeep all ventilation openings clear and unobstructed. Without proper air circulation, components can overheat, causing damage or unreliable operation.
WARNING This equipment is intended to be electrically grounded. Your Macintosh is equipped with a
Health, Safety, and Maintenance Tips | 117 |
