Leasetimesecs, Netaddress, Netmask, Netrangeend | Apple oxs specification

132

Subnet Parameter

subnets:_array_id:<subnetID>: Description

lease_time_secs	Lease time in seconds.
	Default = "3600"
	Corresponds to the Lease Time pop-up menu and field in
	the General pane of the subnet settings in the Server
	Admin GUI application.

net_address	The IPv4 network address for the subnet.

net_mask	The subnet mask for the subnet.
	Corresponds to the Subnet Mask field in the General
	pane of the subnet settings in the Server Admin GUI
	application.

net_range_end	The highest available IPv4 address for the subnet.
	Corresponds to the Ending IP Address field in the
	General pane of the subnet settings in the Server Admin
	GUI application.

net_range_start	The lowest available IPv4 address for the subnet.
	Corresponds to the Starting IP Address field in the
	General pane of the subnet settings in the Server Admin
	GUI application.

selected_port_name	The network port for the subnet.
	Corresponds to the Network Interface pop-up menu in
	the General pane of the subnet settings in the Server
	Admin GUI application.

WINS_NBDD_server	The NetBIOS Datagram Distribution Server IPv4 address.
	Corresponds to the NBDD Server field in the WINS pane
	of the subnet settings in the Server Admin GUI
	application.

WINS_node_type	The WINS node type. Can be set to:
	"" (not set, default)
	BROADCAST_B_NODE
	PEER_P_NODE
	MIXED_M_NODE
	HYBRID-H-NODE
	Corresponds to the NBT Node Type field in the WINS
	pane of the subnet settings in the Server Admin GUI
	application.

WINS_primary_server	The primary WINS server to be used by clients.
	Corresponds to the WINS/NBNS Primary Server field in
	the WINS pane of the subnet settings in the Server
	Admin GUI application.

Chapter 13 Working With Network Services

Image 132

Apple oxs Leasetimesecs, Netaddress, Netmask, Netrangeend, Netrangestart, Selectedportname, WINSNBDDserver, WINSnodetype

Contents

Mac OS X Server Command-Line Administration 034-2354/10-24-03 Contents Setting General System Preferences Energy Saver SettingsViewing or Changing Sleep Settings Power Management Settings Working With Disks and Volumes Mounting and Unmounting VolumesMounting Volumes Unmounting Volumes Working With File Services AFP ServiceStarting and Stopping AFP Service Checking AFP Service Status Working With Print Service Starting and Stopping Print ServiceChecking the Status of Print Service Viewing Print Service Settings Changing Settings Using serveradmin 156 Changing Open Directory Service Settings 157 157 Configuring Ldap Index 171 Commands and Other Terminal Text Command Parameters and OptionsNotation Conventions Summary Default Settings Commands Requiring Root Privileges Using Terminal To open Terminal Correcting Typing Errors Repeating CommandsIncluding Paths Using Drag-and-Drop To type a command $ sudo serveradmin list Sending Commands to a Remote Server Sending a Single CommandExample ssh -l admin To open a connection to a remote server Updating SSH Key Fingerprints Getting Online Help for Commands Using TelnetTo enable Telnet access To disable Telnet access Serversetup Determining Whether a Service Needs to be RestartedPage Installing Server Software Automating Server SetupCreating a Configuration File Template To save a template configuration file during server setup Installing Server Software and Finishing Basic Setup Installing Server Software and Finishing Basic Setup Installing Server Software and Finishing Basic Setup Changing Server Settings Naming Configuration FilesStoring a Configuration File in an Accessible Location Viewing, Validating, and Setting the Software Serial Number Updating Server Software Moving a Server Page Examples Automatic RestartTo restart the local server To restart a remote server immediately Changing a Remote Server’s Startup Disk Shutting Down a ServerTo change the startup disk To shut down a remote server immediately Computer Name Date and TimeViewing or Changing the Computer Name To display the server’s computer name Viewing or Changing the System Date Viewing or Changing the System TimeViewing or Changing the System Time Zone Energy Saver Settings Viewing or Changing Sleep SettingsViewing or Changing Automatic Restart Settings Viewing or Changing Network Time Server Usage Power Management Settings Startup Disk SettingsViewing or Changing the Startup Disk Sharing Settings International SettingsViewing or Changing Remote Login Settings Viewing or Changing Language Settings Login Settings To view the current settingDisabling the Restart and Shutdown Buttons Viewing Port Names and Hardware Addresses Network Port Configurations Viewing or Changing Media SettingsCreating or Deleting Port Configurations Activating Port Configurations TCP/IP Settings Changing Configuration PrecedenceChanging a Server’s IP Address To list TCP/IP settings for a configuration To view TCP/IP settings for port en0To view TCP/IP settings for a particular port or device To change TCP/IP settings for a particular port or device Viewing or Changing DNS Servers AppleTalk Settings Proxy SettingsViewing or Changing FTP Proxy Settings Enabling TCP/IP Viewing or Changing Web Proxy Settings Viewing or Changing Secure Web Proxy SettingsViewing or Changing Streaming Proxy Settings Viewing or Changing Gopher Proxy Settings AirPort Settings Viewing or Changing Socks Firewall Proxy SettingsViewing or Changing Airport Settings Computer, Host, and Rendezvous Name Viewing or Changing the Local Host Name Viewing or Changing the Rendezvous NamePage Checking for Disk Problems Mounting VolumesUnmounting Volumes Monitoring Disk Space Reclaiming Disk Space Using Log Rolling Scripts Checking to See if Journaling is Enabled Turning on Journaling for an Existing VolumeManaging Disk Journaling Example Enabling Journaling When You Erase a Disk Setting Up a Case-Sensitive HFS+ File SystemErasing, Partitioning, and Formatting Disks Disabling Journaling Imaging and Cloning Volumes Using ASR To image a boot volumeTo restore a volume from an image Hdiutil convert -format Udzo pathtoimage -o compressedimage To create a user To create a user with a specific UIDTo create a user with a specific UID and home directory Importing Users and Groups To import users and groups Creating a Character-Delimited User Import File Writing a Record DescriptionUse the shorthand StandardGroupRecord DSRecTypeStandardGroups Using the StandardUserRecord Shorthand User Attributes AttributeFormat Sample values Attribute Format Sample values MCXSettings AdminLimitsAuthentication AuthenticationHint Mail Attributes in User Records MailAttribute field Description Sample values NotificationState KNotificationStateNotificationOff is assumed NotificationStaticIP Value Checking a Server User’s Name, UID, or Password Checking a User’s Administrator Privileges Creating a User’s Home DirectoryCreating a Group Folder Mounting a User’s Home DirectoryPage Listing Share Points To list existing share points Creating a Share Point To create a share pointExamples AFP Service Changing AFP Settings List of AFP Settings Admin31GetsSp AdminGetsSpAllowRootLogin AttemptAdminAuth GuestAccess AdminUsersDefault = afpserver LogLogin Unixwithclassicadminpermissions Default = classicpermissionsNoadminkills SpecialAdminPrivs List of AFP serveradmin Commands Listing Connected UsersTo list connected users Output Disconnecting AFP Users Sending a Message to AFP UsersTo send a message To disconnect users Canceling a User Disconnect To cancel a disconnectValue Description Listing AFP Service Statistics To list samples NFS Service Starting and Stopping NFS ServiceChecking NFS Service Status Viewing NFS Settings FTP Service Changing FTP Settings FTP SettingsParameter ftp List of FTP serveradmin Commands Ftpcommand= DescriptionPage Viewing SMB Settings Changing SMB SettingsTo list all SMB service settings Or see List of SMB Service Settings on List of SMB Service Settings Parameter smb Description Netbios name Local masterLog level Max smbd processes List of SMB serveradmin Commands Smbcommand= DescriptionListing SMB Users Disconnecting SMB Users Value returned by getConnectedUsers Listing SMB Service Statistics Updating Share Point Information Viewing SMB Service Logs Smb-logVar/log/samba/log.smbd Name-logPage Checking the Status of Print Service Viewing Print Service Settings Changing Print Service Settings Print Service SettingsParameter print Description Queue Data Array Parameter printDescription Here is an example of a queue array parameter block Print Service serveradmin Commands Pausing a QueueListing Queues To pause a queue Listing Jobs and Job Information Holding a JobTo hold a job Viewing Print Service Log Files To release the jobPage Checking NetBoot Service Status Viewing NetBoot Settings Changing NetBoot Settings NetBoot Service SettingsGeneral Settings Parameter netboot Description Storage Record Array Filters Record Array Image Record Array NetBootPortsRecordsArrayarrayindexm IsEnabledAtIndexPort Record Array EthernetPage Checking the Status of Mail Service Viewing Mail Service Settings Changing Mail Service Settings Mail Service SettingsParameter mail Description Postfixdisablevrfycommand PostfixlmtpsaslpasswordmapsPostfixsmtpsaslpasswordmaps Postfixsmtpsaslauthenable Postfixdeliverlockdelay PostfixmailboxcommandPostfixdefaultverpdelimiters Postfixcleanupservicename Postfixforkdelay PostfixdisablemimeoutputconversionPostfixsmtpdtimeout Postfixsmtpderrorsleeptime Postfixdelaywarningtime PostfixtriggertimeoutPostfixrelaytransport Postfixaliasmaps Postfixsmtpdnoopcommands PostfixalternateconfigdirectoriesPostfixdefaulttransport Postfixsmtpddelayreject Postfixqueueservicename PostfixipctimeoutPostfixdefaultprivs Postfixinflowdelay Postfixshowqservicename PostfixsmtppixworkarounddelaytimePostfixqmqpdtimeout Postfixignoremxlookuperror Postfixbounceservicename PostfixcontentfilterPostfixqmqpderrordelay Postfixsmtpdsenderloginmaps Postfixdefaultextrarecipientlimit PostfixlmtpdatadonetimeoutPostfixlmtpdataxfertimeout Postfixsmtpdatadonetimeout Imappoptimeout ImapmupdateserverImaptimeout Imapenablepop Imapdefaultpartition Imapsrvtab Default = /etc/srvtab ImapimapauthloginImapenableimap Imapallowanonymouslogin Mail serveradmin Commands Command Listing Mail Service Statistics Viewing the Mail Service Logs To display the log locations Setting Up SSL for Mail Service Generating a CSR and Creating a Keychain 120 Obtaining an SSL Certificate Importing an SSL Certificate Into the Keychain Setting Up SSL for Mail Service on a Headless Server Creating a Passphrase File Checking Web Service Status Viewing Web Settings Changing Web Settings Serveradmin and Apache SettingsChanging Settings Using serveradmin An appropriate value for the setting Web serveradmin Commands Viewing Service LogsListing Hosted Sites To list sites Viewing Service Statistics Requestspersecond forCacherequestspersecond for Cachethroughput for Example Script for Adding a Website Addsite FileAddsite.in File To run the script IpaddressPort Root Dhcp Service Starting and Stopping Dhcp ServiceChecking the Status of Dhcp Service Viewing Dhcp Service Settings Changing Dhcp Service Settings Dhcp Service SettingsParameter dhcp Description Dhcp Subnet Settings Array About Subnet IDsSubnet Parameter Leasetimesecs NetaddressNetmask Netrangeend Adding a Dhcp Subnet To add a subnetWINSscopeid WINSsecondaryserver List of Dhcp serveradmin Commands Viewing the Dhcp Service LogCommand Dhcpcommand=Description Location of the DNS service log DNS Service Firewall Service Listing DNS Service StatisticsStarting and Stopping Firewall Service Sample Output Checking the Status of Firewall Service Viewing Firewall Service SettingsChanging Firewall Service Settings Firewall Service Settings Defining Firewall Rules IPFilter Groups With Rules ArrayAdding Rules by Modifying ipfw.conf Parameter ipfilter Description Unmodified ipfw.conf file Adding Rules Using serveradmin ExampleRule Firewall serveradmin Commands IPFilter Rules Array NAT Service Changing NAT Service Settings NAT Service SettingsParameter nat Description NAT serveradmin Commands Viewing the NAT Service LogParameter natDescription VPN Service Starting and Stopping VPN ServiceChecking the Status of VPN Service Viewing VPN Service Settings List of VPN Service Settings Parameter vpnServers Description PPPDSACLEnabled Com.name.ppp.l2tp PPPAuthenticatorPlugins Arrayindex n Com.name.ppp.l2tpPPPLCPEchoEnabled Com.name.ppp.l2tp PPPVerboseLogging Com.name.ppp.l2tp PPPDSACLEnabled Com.name.ppp.pptp PPPAuthenticatorPlugins Arrayindexn Com.name.ppp.pptpPPPLCPEchoEnabled Com.name.ppp.pptp PPPCCPEnabled Com.name.ppp.pptp List of VPN serveradmin Commands Viewing the VPN Service LogVPN Service Log on this Be restarted. See Determining Whether a Service Needs to be IP Failover RequirementsFailover Operation Hardware To enable IP failover Enabling IP Failover Configuring IP Failover Notification OnlyPre and Post Scripts Enabling PPP Dial-In Page Testing Your Open Directory Configuration Testing Open Directory PluginsGeneral Directory Tools Modifying an Open Directory Node Registering URLs With Service Location Protocol SLP Changing Open Directory Service SettingsParameter dirserv Description Configuring Ldap Standard Distribution ToolsProgram Used to Delay Rebind Idle TimeoutIdle Rebinding Options Additional Information About Ldap Password Server NetInfo Kdcsetup KerberosautoconfigKerberos and Single Sign On Tool in usr/sbin Description Stopping Qtss Service Checking Qtss Service Status Viewing Qtss Settings Changing Qtss SettingsTo list all Qtss service settings $ sudo serveradmin settings qtss Qtss Settings Descriptions of SettingsQtss parameters you might change Parameter qtss Description ModulesarrayidQTSSAdminModule AdministratorGroup ModulesarrayidQTSSAdminModuleAuthenticate ModulesarrayidQTSSAdminModule Enableremoteadmin ModulesarrayidQTSSAdminModule Disableoverbuffering ModulesarrayidQTSSReflectorModule Enablebroadcastannounce ModulesarrayidQTSSReflectorModuleEnablebroadcastpush ModulesarrayidQTSSReflectorModule Serverdefaultauthorizationrealm Qtss serveradmin Commands Listing Current Connections Viewing Qtss Service Statistics Error.log Forcing Qtss to Re-Read its PreferencesTo force Qtss to re-read its preferences Library/QuickTimeStreaming/Logs To set up /Sites/Streaming in older home directories Preparing Older Home Directories for User StreamingCreated Page Index Installer command 21 IP address Kdcsetup utility 160 KerberosKerberosautoconfig tool 173 Used by ldapsearch 157 scripts 174 175