BASE UNIT BACK-UP BATTERIES

Replacing the Base Power Reserve Batteries

The base unit back-up batteries need to be replaced when the PWR RESERVE BATT LOW light on the base flashes when the phone is on.

1Turn the base unit over. (Remove the wall bracket if the phone is wall-mounted.)

2Open the battery compartment door.

3Remove the old batteries.

4Insert four new AA batteries as indicated by the diagram in the compartment.

5Close the battery compartment door.

IMPORTANT: Do not install batteries during a power failure. Installing batteries during a power failure will not enable the phone to work. When battery power is low, the PWR RESERVE BATT LOW light goes on. Replace the batteries promptly.

43

Page 45
Image 45
AT&T 7720 user manual Base Unit BACK-UP Batteries, Replacing the Base Power Reserve Batteries