Baldor ID101F50-E manual Parameter 21-Operating Mode, Value, Start Control, Type of Control

21-Operating Mode - Sets the basic operation of the inverter input terminals and keypad FWD and REV keys. The Series 10 inverter has several modes of operation to fit various application requirements. Please refer to the following table to determine which operating mode is right for your application. The available options include keypad only, control terminal strip only, combination keypad and control terminal strip operation, electronic potentiometer, preset speeds, 2-wire control, and

3-wire control. The factory setting is ª0º, keypad speed control and keypad run FWD only.

Parameter 21-Operating Mode

Value

Speed Control

Start

Control

Type of Control

0	Keypad	Keypad	Keypad FWD Only, 8 Speeds or 4 speeds
			with Accel/Decel Select
10	Keypad	Keypad	Keypad FWD and REV, 8 Speeds or 4 speeds
			with Accel/Decel Select
1	Terminals	Keypad	Keypad FWD Only, 8 Speeds or 4 speeds
			with Accel/Decel Select
11	Terminals	Keypad	Keypad FWD and REV, 8 Speeds or 4 speeds
			with Accel/Decel Select
2	Keypad	Terminals	2-Wire, 8	Speeds or 4 speeds with Accel/De-
			cel Select
3	Terminals	Terminals	2-Wire, 8	Speeds or 4 speeds with Accel/De-
			cel Select
4	Keypad	Terminals	3-Wire, 4	Speeds
5	Terminals	Terminals	3-Wire, 4	Speeds
6	Terminals	Terminals	2-Wire Electronic Pot with 1 Preset Speed or
			Accel/Decel Select
7	Terminals	Terminals	3-Wire Electronic Pot

3-8 Operation