11. Image files menu
Image11-2
InPiP mode, the files which may be loaded will be of the data type if the active window is a data window, or
they willb e of the video type if the active window is a video window.

What to do if the image is not perfect ?

Ifthe displayed image is not correct after AutoImage or after selecting the best fitting file, go to the Edit menu, select the active file
and change the settings.
11.2 Auto Image
What can be done ?
Auto Image creates the best suited image file for the connected source.
It calculates/measures several source parameters :
• Totalpixels per line
• Start pixel
• Phase
• Contrast/Brightness levels
Auto Image works only for data images.
Them easure of thetotal num berof pixels per line can be done through 2 methods
• Limited scan: a windowing is used to allow fast tracking.
The operation takes about 20 seconds (depending on file)
• Full scan: tracking is done over the full range.
The operation takes about 1.5 minutes (depending on file)

How to launch Auto Image?

1. Press MENU to activate the Tool bar
2. Press →to select the Image files item
3. Press ↓to Pull down the Image files menu
4. Use ↑or ↓to select Auto Image
5. Press →to open the menu
6. Use ↑or ↓to select the desired file scan method (image 11-3)
7. Press ENTER
96 R5976491 IQ PRO G500 01/02/2007