9. Signal Menu

When the source switching mode is the fade in/out mode, the audio (when available) switching will also be
done usinga fade in/out effect.
9.2 Background

Purpose

Ifthere is no signal connected to the projector, the background will be a logo, a black or a blue screen depending on the background
settings.

How to change the background ?

1. Press MENU to activate the Toolbar
2. Press to select the Signal item
3. Press to Pull down the Signal menu
4. Use or to select Background
5. Press to pull down the menu
6. Use or to select the desired background (image 9-2)
7. Press ENTER
Image9-2
The logo display is only possible in the full screen mode, a logo can thus not be displayed (rescaled) in a
window inthe PiP mode.
Whenthere is n o signal connected, the projector will also start its standby timer countdown (if enabled) and
shutsdown after the predetermined time.
86 R5976491 IQPRO G500 01/02/2007