9. Signal Menu

9. SIGNAL MENU
Overview
• Switching mode
• Background

9.1 Switching mode

Switching from one source to another
Tominimize undesired effects when switching from one source to another,one can use the Seamless switching mode, beside Seam-
lessswitching there is a wide choice of several effects which render the source switching transitions more enjoyable.
How to select a switching mode ?
1. Press MENU to activate the Tool bar
2. Press →to select the Signal item
3. Press ↓to Pull down the Signal menu
4. Use ↑or ↓to select Switching mode
5. Press →to pull down the menu
6. Use ↑or ↓to select the desired switching mode (image 9-1)
7. Press ENTER
A white bullet shows the active effect.
The next source switching willbe do neu sing the selectedeffect
Image9-1
TheRand om mode will select a new switching mode at each source switching i.e. there will never be 2 suc-
cessive source switchings with the same effect.
The Seamless switching mode is not used in the Random mode.
The switching effects are only possible in the full screenmode
R5976491 IQPRO G500 01/02/2007 85