14. IQ Network
14.4.4 Configuring the client software
Thesame universal client interface is used for different network centric projectors (iQ, iD, iCon). Thelayout of
thein terface (position of the controls,...) is adapted after detection of the projector type. Some screenshots
may not fully coincide with the reality.
How to start up the client software ?
1. Start up the previously installed client program
Theinterface shows 3 ta bs(upper tabcontrol ): Control, Diagnosis and Configuration
The active sub interface is the controls ub screen (image 14-7)
2. Click on the upper menubar to select the desired sub interface
Image14-7
Controlinterface
IP
InternetProtocol. The network layer of TCP/IP.Required for communication with the internet.
How to add a projector to the projector list
1. Click on the white arrow (image 14-8)
A menu is dropped down (image 14-9)
2. click on the + sign of the projector list
A dialog box is displayed (image 14-10)
3. Fill in the Name, the IP addre ss (optional) and the Port number of TCP/IP connection
Note: default port number = 9999
4. Fill in the alias
Tip: “Alias”is a custom na me whereas “Name” is the name by which the projector is identified on the (corporate) network
5. Click OK to confirm or Cancel
The projector is now added to the listof projectors
R5976491 IQ PRO G500 01/02/2007 129