3. Connections
How to set up the S-Video extendedconfiguration ?
1. Connect the video sources to the desired connector (image 3-13)
Note: An adapter cable is required
Image3-13
Connecting2 composite Video signals on the S-Video connector
Multiplevideo signals can not be visualized simultaneo usly since there is only one decoder. However, the use
ofthe optional Aud io & video layer(3) allows to visualize up to 2 different video signals (in PiP mode ).
3.2.9.4 SummarizingSummarizing the extended connections
A composite video signal can be entered via 7 different inputs, which gives us 7 different video signals (not including
optional video input):
1. Video R :via 1st BNC
2. Video G : via2nd BNC
3. Video B : via 3rd BNC
4. Video VS :v ia5th BNC
5. Video: via the standard composite videoBNC input
6. Video Y : via S-Videoinput
7. Video C: via S-Video input
Key3o n the RCU allows to browse through the active video inputs, each hit moves to the next active video input. The first hit on
key 3 selects the last selected video input.
Inthe same wa y3 S-Video signals can be visualized throu gh 3 different inputs
1. S-Video 1: via the standard S-Video input
2. S-Video2 : viathe 5 the BNC and the standard Com posite Videoinput
3. S-Video 3 : via the 1st and the 3rd BNC
Key4on the RCU allows to browse through the active S -Videoinputs, eachhit moves to the next active video input. The first hit on
key 4 selects the last selected video input.
R5976491 IQPRO G500 01/02/2007 27