13. Installation menu
Image13-5 Image13-6
Entering the new projector address ?
1. Enter the new projector address withthe digit keys on the RCU, the local keypad or the cursor keys.
This address must be between 0 and 255.
How to change the common RC5 address ?
1. Press MENU to activate the Tool bar
2. Press →to select the Installation
3. Press ↓to Pull down the Installation menu
4. Use ↑or ↓to select Projector address
5. Press ENTER
A dialog box appears on the screen.
Entering the new common address ?
1. Enter the new projectoraddress with the digit keys on the RCU, the local keypad or the cursor keys.
This address must be between 0or1.
13.3 Orientation
Projector orientations
Dependingon how the projector is oriented, the projector ’sinternal sett ingshave to be adapted.
How to change the orientation ?
1. Press MENU to activate the Toolbar
2. Press →to select the Installation item
3. Press ↓to Pull down the Installation menu
4. Use ↑or ↓to select Orientation
5. Press →to pull down the menu
6. Use ↓or ↑to select the desired orientation (image 13-7)
7. Press ENTER
The projectionis adapted and a black bullet shows the active conf iguration.
R5976491 IQ PRO G500 01/02/2007 115