4. Getting started
Image4-1
Localkeypad layout
Remote control functions.
Thisremote controlincludes a ba ttery powered infrared (IR) transmitter that allows the user to control the projector remotely. This
remotecontrol is used for source selection, control, adaptation and setup. It includes automatic storing of picture controls (Bright-
ness, Sharpness...) and settings.
Other functions of the remote control are :
• switching between stand by and operational mode.
• switchingto "p ause" (blanked picture, full power for immediate restarting)
• direct access to all connected sources.
Diagnose LED’s
Green Red
LED1 cool down sequence: flickers 60 seconds (120
seconds in case of iQ 400 series) after switching
to standby
rescueprogram ( software error)
LED2 only for the versions containing a server:
shows when projector is in
standby and server is active.
hardware error
LED3 IR acknowledgement continue : standby
flickers: Security = ON
30 R5976491 IQ PRO G500 01/02/2007