4. Getting started
4.2 Terminology overview
Overview
The following table gives an overview of the keys.
Image4-2
1Function keys userprogrammable keys w ith functions for direct access.
2MENU Menu key,to enter or exit the Toolbar menu.
3Address key (recessedkey), to enter the address of the projector (between 0 and 9). Pressthe recessed
addresskey with a pencil, followed by pressing one digit button between 0 and 9.
4LOGO key allowsto recall the stored Logo (not in PiP mode)
5PAUSE to stop projection for a short time, press ’PAUSE’. The image disappears but full power is
retained for immediate restarting.
6STBY standbybutton, to start projector when the power switch is switched on and to switch off the
projectorwithout switch ingo ffthe power sw itch.
Attention: Switchingto Standby. When the projector is running and you want to
goto s tandby,press the standby key f or 2 seconds.
7MUTE tointerrupt the sound reproduction (audio = optional.
8AUTOIMAGE Autoimage, to center the image on the active LC D surface.
9Digitbuttons direct input selection.
9b SOURCEbutto n thisbutton allows to s witch through the active (scanned) inputs
R5976491 IQ PRO G500 01/02/2007 31