13. Installation menu
Image13-2 Image13-3
13.2 Projector address
What can be done ?
The projector is shipped with projector address set to ”0”
Insome cases the projector address must be changed, for example if an unique RCU is used to control 2 or more projectors (inde-
pendently).
Inthe OSD menu Projector Address , the following addresses can be programmed :
•Projectoradd
ress: address defined by the user, may be from 0 to 255
0-9is used for RCU communication, 0–255 being used for RS232 serial communication.
• Common address : address may be 0 or 1

How to change the projector’s RC5 address ?

1. Press MENU to activate the Tool bar
2. Press →to select the Installation
3. Press ↓to Pull down the Installation menu
4. Use ↑or ↓to select Projector address (image 13-4)
5. Press ENTER
A dialogbox appearson the screen. (image 13-5, image 13-6)
Image13-4
114 R5976491 IQ PRO G500 01/02/2007