13. Installation menu
13.10 Gemini installed (only for GEMINI CADWALL systems ! )

When to enable ?

Gemini is option is necessary when the iQ is used in a Gemini 2 channel CADWALL system. By enabling Gemini the restrictions
relativeto the allowed difference in the number of total lines are changed :
1 line for non interlaced sources (instead of 0)
2 lines for interlaced sources (instead of 1)
Thedefault setting is NO .Never activatethis option if not in presence of a Gem iniCA DWALLsystem.

How to enable Gemini ?

1. Press MENU to activate the Toolbar
2. Press to select the Installation item
3. Press to Pull down the Installation menu
4. Use or to select Gemini installed (image 13-19)
5. Use or to select ON
6. Press ENTER
The Gemini option is enabled
Image13-19
122 R5976491 IQ PRO G500 01/02/2007