7. Image Menu
4. Use ↑or ↓to select Show native resolution (image 7-13)
5. Press →to pull down the menu
6. Use ↓or ↑to select On
7. Press ENTER
A white bullet shows the selection
Image7-13
Thedefau ltmo de is used if the show native resolution and the full screen functionare off.
The default mode shows always the native ratio and forces the native resolution of the panels (part of the
image blanked where needed)
Whenshow nativeresolution is ON andthe resolution of the s ource is higher than the panel resolution , use
the arrow keys to scroll through the image (pan).
7.4 Keystone
What can be done ?
TheKeystone adjustment is used to align the image, this can be necessary when pro jecting undera n on standard angle

How to perform a Keystone correction ?

1. Press MENU to activate the Tool bar
2. Press →to select Image
3. Press ↓to Pull down the Image menu
4. Use ↑or ↓to select Keystone (image 7-14)
5. Press ENTER to confirm
A sliderbox is displayed . (image 7-15)
Use←or →, the numeric keys on th e remote, or the keypad to adjust the keystone.
TheTop and bottom adjustments affect the image differently. (image 7-16, image 7-17)
R5976491 IQ PRO G500 01/02/2007 63