Barco G500 How to select a source on the 5 cable input ?, 3.2.4 Composite Video Input Composite video connection, Input specifications, How to select a Composite Video Input ?

3. Connections
Beside the standard RGB, component and sync signals, the extended mode of the 5 Cable input makes pro-
cessing of additional signals possible.
How to select a source on the 5 cable input ?
1. Press 1on the RCU
Note: Another way for selecting thisinput is via the Menu
Component Video signals (PR/Y/PB)
Some interfaces use progressive output signals with a double line frequency of 32 kHz. The video decoder
used for the video signals is not appropriate for these signals since it can only handle 16 kHz signals. This
signalhas therefore to be internally redirected,this is done in the Source selection menu by selecting Data on
BNC’sinstead of Component video and by selecting Pr/Y/Pbin the advanced settings of the Im age file menu.
3.2.4 Composite Video Input
Composite video connection
AComposite video signal is often available on a yellow cinch connector of a Camera, VCR or DVD playe r,in this case you will need
an adapter cable cinch/BNC to connect to Videoinput of the RG B board.
Input specifications
The Composite videoinput section is made of 1BNC input terminal.
1.0 Vpp ± 3dB
75 Ωterminated
No loop through
Image3-5
How to select a Composite Video Input ?
1. Press 3on the RCU
Note: Another way for selecting this input is via the Menu.
Theprojecto ral lows the input of more composite video signals (up to 7 composite video signals).
"5 cableextended configuration", page 25
This note is not valid for the Pro version :
TheAudio&Video optio nal layer(3) allows the use of an additional Video BNC input (referred to as Video2).
Theselection of this optional input happens the same way as the standard input (key3)
22 R5976491 IQ PRO G500 01/02/2007