14. IQ Network
Image14-11
How to add projectors to a group ?
1. Click on the projector to be added in the projector list
2. Drag the projector down to the projector group.
The projector is added to the group.
Addinga projector to a group can also bedone by using the “Copy + Paste” method on the right mouse button
menu.
How to connect to a projector or group of projectors ?
1. Double click on the projector or group of projectors
Agreen dot appears, indicating that the projectoris present on the network andworking properly (image 14-12)
The name of the projector or group is now displayed in the upper part of the screen and indicates that the communication has
been set (image 14-13)
Image14-12
connectedand active projector
A connected and active projector
Image14-13
A connected and active projector
When connected to a group of projectors, some controls may be disabled.
Ingeneral, co ntrols will only be selected if this is the status of all projectors in the group.
Sliders will be set to a particular value only if this is the same on all projectors in the group, otherwise they
willbe positioned centrally w itha d ash in the value box. When the slider is moved the box will show the new
value and this value will be sent to all projectors in the group.
Labels such as Current Source in the general page will only be shown if the string value is the same on all
projectors, otherwise a dash will be shown
The Target information block
Thetarget information block displays the main characteristics of the conne cted projector or group of projectors.
Thisgives also an indication wh etherthe communicatio n setting has been successfulor n ot.
R5976491 IQ PRO G500 01/02/2007 131