Barco G500 15. GENERAL GUIDELINES ON NETWORK CONFIGURATION

15. GENERAL GUIDELINES ON NETWORKCONFIGURATION

Overview

• General Network

• The Internet and Web services

The installationof the iQ Pro in a Local Area Network must be done in the same way as the installation of

a standard PC in that particular network meaning that the same rules and accepted practice should be re-

spected.

The assistance of qualified IT personnel is advised.

AnAdministrato r password has been installed for security reasons (worm and virus protection):

Password : Barco (case sensitive !)

Toenable access to your network resources, the iQ Pro must be a member of your NT Domain.

This can be configured in the Control Panel, under “System”, in the “Computer Name” tab, under the button “Network ID”. You’ll

needsome help from t he Network Administrator,since you need special rights to do this.

TheiQ Pro uses TCP/IP networking,so it needs the IP address, network mask, broadcast address, gateway, dns, wins, etc. tobe

configured. This can be done in the Control Panel, under “Network Connections”. This can however be configured automatically, if

your network uses DHCP.

If you want to access the Internet from the iQ Pro, and the projector is located behind a firewall, you will also need to configure

theproxy to use. This can be done in the Control Panel, under “Internet Options”, in the tab “Connections”, under the button “LAN

Settings”.

Touse the iQ Pro web client, you might need to change the “LAN Settings” on your local computer

If the client thinks the projector is on the Internet, and tries to connect to it through the proxy,you can turn on the “Bypass proxy

serverfor local addresses” feature, or add the projector to theExceptions list under the “Advanced” button.

The“Internet Inform ation Services(IIS) ” component has to be installed on the operating system.

Toenable management via the IQProSNMP Agent, you must enable the SNMP system service, and configure the communities

accordingly.

This can be done in the Control Panel, under Administrative Tools,in the Services, under the entry “Management and Monitoring

tools”. You mayalso need to enable SNMP in the iQ Pro Control Server in de suystem tray, see image below.

R5976491 IQ PRO G500 01/02/2007 161