Glossary

GLOSSARY
AGC
AutomaticGain Contro l: allows an automatic amplitude (gain) control of the incoming video signal
ANSI 73.11
Americanpow er plugto connect the power cord to the wall outlet.
CEE7
European power plug to connectthe power cord to the wall outlet.
Common address
Defaultaddress. Projectorwill always execute the command coming from aRCU programmed with that common address.
Component Video
InComponent Video the term component describes a number (3) of elements that are needed to make up the video picture, these
componentsare R-Y/Y/B-Y. A composite video signal on the other hand contains all the information needed for the color picture in
a single channel of information
DVI
DigitalVisual Interface is a display interface developed in response to the proliferation of digital flat panel displays.
Thedigital video connectivity standard that was developed by DDWG (Digital Display Work Group). Thisconnection standard offers
two different connectors: one with 24 pins that handles digital video signals only, and one with 29 pins that handles both digital
andanalog video. This standard uses TMDS (Transition Minimized Differential Signal) from Silicon Image and DDC (Display Data
Channel) from VESA (Video Electronics Standards Association).
DVI can be single or dual link.
Graphics
Native resolution of the LCD panels = 1024 pixels x 768 pixels (4:3)
GUI
Graphic User Interface
IP
InternetPro tocol. The network layer of TCP/IP. Required for communication with the internet.
LAN
Local Area Network
PiP
PiPstands for "Picture in Picture" and allows to display multiple windows containing each of them an image. The windows may be
of the video or data type.
Projector address
Address installedin the projecto rto be individually controlled.
Reality(SXGA)
Native resolutionof the LCD panels = 1366 pixels x 1024 pixels (4:3)
Reality(SXGA+)
Native resolution of the LCD panels = 1400 x 1050 pixels (4:3)
SBC
Single Board Computer,
R5976491 IQ PRO G500 01/02/ 2007 183