7. Image Menu
5. Press →to pull down the menu
6. Use ↓or ↑to select Gamma
7. Press ENTER
On the screen appears now a sliderbox
8. Use ←or →, the numeric keys on theremote, or thekeypad to ch ange the Gamma

7.1.7 Phase

Phase adjustment

Abad phase adjustment will result in bad transitions and sometimes noise (text can end to be unclear).

How to change the Phase ?

1. Press MENU to activate the Toolbar
2. Press →to select the Image item
3. Press ↓to Pull down the Image menu
4. Use ↑or ↓to select settings
5. Press →to pull down the menu
6. Use ↓or ↑to select Phase
7. Press ENTER
On the screen appears now a sliderbox (image 7-6)
8. Use ←or →, the numeric keys on the remote, or thekeypad to chang e the Phase
Image7-6

7.1.8 Noise reduction

How to change the Noise reduction ?

1. Press MENU to activate the Toolbar
2. Press →to select the Image item
3. Press ↓to Pull down the Image menu
4. Use ↑or ↓to select settings
5. Press →to pull down the menu
6. Use ↓or ↑to select Noise reduction
7. Press ENTER
On the screen appears now a sliderbox
8. Use ←or →, the numeric ke ys on the remote, or the keypad to change the Noise reduction setting.
7.2 Aspect ratio

Aspect ratios

The standard aspect ratio used in broadcast television is the 4:3 ratio. However, most of the DVD sources use nowadays the
widescreen 16:9 or even the cinemascope 2.35:1 aspect ratio.
Some DVD sources may even use the anamorphic 16:9 or anamorphic 2.35:1 to take advantage of the higher vertical resolution
offeredby the 4:3 ratio. The“anamo rphic”term meansthat the original widescreen image is squeezed in order to fit the 4:3 aspect
ratio.
58 R5976491 IQ PRO G500 01/02/2007