Bosch Appliances D1260, D1260B Part II: System Commands, Entering a Passcode, 3.Press ENTER, **No Authority, for more information, Table 2: Keypad Commands

D1260/D1260B Owner's Manual Part II: System Commands - Entering a Passcode

Part II: System Commands

Below is a summary of the commands covered in this section.

Some of these functions may not be available in your system. Please consult your security company to determine which

commands have been made available to you.

If you attempt to enter a function that’s not available or if the function is available in the system but your passcode is not authorized to perform the function, then **No Authority** will display on the Keypad.

Press the COMMAND key and then the one or two digits shown in the table below to perform the function. When you use a command to perform a function, the displays in the function list below do not appear at your keypad.

Some commands listed below may not be available. Contact your security company

for more information.

Table 2: Keypad Commands

COMMAND Function

Master Arm

Master Arm Instant

+

Perimeter Instant

Perimeter Delay

Silence Trouble Sounder & Clear

Trouble Display

View Memory

+

Walk Test

+

Reset Sensors

+

Watch Mode

Special Alert

Perimeter Partial

Special Alert

Walk Test

+

Entering a Passcode

1.The display may prompt you to enter your passcode.

2.The passcode is shown as asterisks (*) when entered and advance from the right side of the display to the left until all passcode digits (from a minimum of 3 to a maximum of six) are entered.

3.Press ENTER.

Bosch Security Systems 9/04 50410D 15