D1260/D1260B Owner's Manual Appendix - System Trouble Displays
System Trouble Displays
If you see any of the system trouble displays shown below, contact your security company to determine whether repairs are needed.
The Silence> soft key is only displayed if a trouble tone is present. Press the Silence> soft key to silence the following trouble conditions.
Call for Service
Call your security company. Your security system may have failed (Your Security Co. will be replaced with the name of your security company).
Service Panel
Indicates a problem with the panel. The panel is not operating (Your Security Co. will be replaced with the name of your security company). Call your security company for service.
Service Parameter
Service AC Fail
Indicates that AC power to the security system is interrupted. Check the
Service Missing Battery
Indicates the security system’s battery is disconnected or shorted.
Service Communication Fail
Your security system makes repeated attempts to communicate with the security company.
In the event your security system fails to communicate, the command center buzzes and displays
Comm Fail Route Grp1 (Route Group number can be from 1 to 4)
Notify your security company of the communication trouble.
Service Keypad
Indicates a problem with the panel. Your panel may not be operating properly (Your Alarm Company will be replaced with the name of your security company). Call your security company for service.
Service Low Battery
Indicates the security system’s battery is low, or temporarily draining faster than the system can charge it. If this display remains or appears frequently, call your security company for service.
Indicates that a command center, other than the one displaying the message, is in a trouble condition. Notify your security company.
96 | Bosch Security Systems 9/04 50410D |