D1260/D1260B Owner's Manual Part III: Advanced Commands - ADD/CHANGE USER (COMMAND + 5 + 6)

5.If the card is accepted, the display changes to either Card added. or Card changed if the card already exists in your system.

Pressing the <Exit soft key exits out of this function and returns the display to idle text.

Pressing the Next> soft key exits out of this function and returns the display to either Add/Change Level.

Add/Change Sub-User ID

For each user in the system, there can be up to four access cards; one Master User (assigned in the Card> prompt) and up to three sub-users.

1.Pressing the Sub-User>soft key will allow you to add/change a user’s Sub-User access card or credential.

2.The display changes to User 123 Add/Change Sub-User IDs? to add or change any of this user’s sub-user IDs.

Pressing the Yes> soft key will jump to Step 3.

Pressing the No> soft key will jump to Add/Change Passcode.

3.The display changes to Select Sub-User:

Press the <Sub-User 1 soft key to add or change sub-user 1.

Press the <Sub-User 2 soft key to add or change sub-user 2.

Press the <Sub-User 3 soft key to add or change sub-user 3.

Press the Exit> soft key to return to the main Add / Change User display.

4.If adding or changing a sub-user and a card reader is connected to your system, the display changes to Add (or Change) Sub-User 1: Present card to card reader now.

If the display changes to D9210 not ready, contact your security company.

If 20 seconds elapse without pressing a key the display returns to idle text. Pressing the <Exit soft key exits out of this function and returns the display to the main Add / Change User display.

Bosch Security Systems 9/04 50410D

59