D1260/D1260B Owner's Manual Part III: Advanced Commands - SEND REPORT ? (COMMAND + 4+1 or 4+2)

•FRONT DOOR is already bypassed. indicates that the point has already been bypassed.

•FRONT DOOR cannot by bypassed. indicates the system is programmed not to allow that point to be bypassed.

•Invalid point Please try again. indicates that the entered point doesn’t exist and the display returns to allow another point to be entered.

•No additional points. indicates that there are no more points that can be bypassed.

6.You can return to idle text by pressing <Exit.

7.If you are attempting to unbypass a 24-Hour or Fire Point that is still faulted, the keypad will display Cannot unbypass 24hr faulted points.

SEND REPORT ? (COMMAND + 4+1 or 4+2)

Description

This function tests the communication link between your security system and your security company. It is an important part of maintaining a high level of security for your property.

Two types of test reports may be sent. The first type of report is a simple test report (Command 41). The second type of report is a status report (Command 42). This status report indicates the current condition of your system.

Using Send Report

1.Always call your security company before sending a test report.

2.The display shows disarmed idle text.

Press the COMMAND key. The display shows *System Command*.

3.Press the 4 key then the 1 key to send a test report.

Press the 4 key then the 2 key to send a status report.

36

Bosch Security Systems 9/04 50410D