D1260/D1260B Owner's Manual Part III: Advanced Commands - ADD/CHANGE USER (COMMAND + 5 + 6)
Press the <Exit soft key to exit out of this menu and return to the Level changed. display.
6.Repeat Step 5 for each area through Area 8.
7.Once the user’s authority level has been verified for Area 8, the display changes to Level changed.
If the Next> soft key is pressed, the display changes to Add/Change
If the <Exit soft key is pressed, the display changes to Add / Change User Enter User #:
Adding/Changing a User’s Name
1.Pressing the Name> soft key will change the display to <? JANE DOE
(JANE DOE is used as an example.)
2.To change the name use the following soft keys:
Pressing this soft key will display a series of help screens where the keypad can be used to enter specific letters.
Pressing either of these soft keys will cause the currently underlined character to change the previous or next character in the list. The available characters are
Pressing either of these soft keys will cause the cursor of the currently underlined character to move left to the previous position in the name or right to the next position in the name.
Another option is to use the numeric keys to add characters to the text. For the keys with letters, pressing the digit will allow you to cycle through the letters on the key. For instance, pressing '2' will display an A. Pressing it again will display a B, and pressing it a third time will display a C.
The '0' (zero) key will display a 0. The '1' key functions like a space bar - it puts a space in the current position, and advances to the next position.
3.Once the name appears as desired, press the Continue> soft key.
4.The display will change to New user name is JANE DOE Is this correct?
At this point you can accept or reject the changes.
Press the Yes> soft key to accept the name and return to the main Add/Change Menu (depending on panel model).
Bosch Security Systems 9/04 50410D | 57 |