D1260/D1260B Owner's Manual Part III: Advanced Commands - ADD/CHANGE USER (COMMAND + 5 + 6)

D9412/D7412:

D9112/D7212:

Press the <No soft key to reject the name and return to Step 1.

Add/Change Card

1.Pressing the Card> soft key will allow you to add/change a user’s access card or credential.

2.The display changes to either one of the following depending on if an access card exists for the user:

User 123 Add Access Card for this user? - if no access card exists for that user.

Pressing the Yes> soft key will jump to Step 3.

Pressing the No> soft key will jump to Add/Change Level.

User 123 Change this user’s Access Card? -if an access card already exists for this user and you wish to change it. (In both cases, 123 is used as an example)

Pressing the Yes> soft key will jump to Step 3.

Pressing the No> soft key will jump to Add/Change Level.

3.If a card reader is connected to your system, the display changes to Present card to card reader now.

Pressing the <Exit soft key exits out of this function and returns the display to idle text.

If the display changes to D9210 not ready, contact your security company.

Pressing the <Exit soft key exits out of this function and returns the display to idle text.

4.If the card you are trying to add to the system already exists, an error tone sounds and the display changes to Card already exists. Please try again.

Pressing the <Exit soft key exits out of this function and returns the display to idle text.

Then the display returns to Present card to card reader now.

Pressing the <Exit soft key exits out of this function and returns the display to idle text.

58

Bosch Security Systems 9/04 50410D