Bosch Appliances D1260, D1260B PERIMETR INST (COMMAND + 2)

D1260/D1260B Owner's Manual Part II: System Commands - PERIMETR INST (COMMAND + 2)

PERIMETR INST (COMMAND + 2)

Turn On the Perimeter With No Delays

Description

Use this function to turn on only the perimeter of your building, leaving the interior of the building disarmed. This function allows no exit or entry delay time through the perimeter, including the designated exit delay door.

This function is useful in residential systems when everyone is home and ready to retire for the evening. You can have the security of an armed perimeter, yet move freely throughout the interior of the premises.

It is also useful in commercial systems when you are working before or after business hours and wish to have the perimeter armed. Remember there are no entry or exit delays when you use this function. You must disarm (turn off) the system to enter or exit the premises.

Using Perimeter Inst:

1.Interior points are not armed with this command and may remain faulted while arming with COMMAND 2.

2.Press the COMMAND key.

The display shows *System Command*.

3.Press the 2 key.

If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function.

Press the MENU> soft key to enter the

Command Menu,

then press NEXT> soft key repeatedly.

until you reach the PERIMETR INST ?> prompt, then press the adjacent soft key.

4.The display shows Perimeter On Instant.

After arming the perimeter without delays, you cannot enter or exit the premises without disarming the system. Opening a perimeter door before disarming will generate an alarm. If this happens, silence the alarm by turning off your system and call your security company to let them know that it is not an emergency situation.

5.To disarm your security system, enter your personal passcode and press ENTER.

The display then returns to idle text.

22 Bosch Security Systems 9/04 50410D