D1260/D1260B Owner's Manual Part IV:
4.The display will change to show on the top line the area name and the current status on the second line.
Pressing the Next> soft key will change the display to the next area and remain for 20 seconds or until the Next> soft key is pressed for the next area. If the time has elapsed, the display returns to idle text.
Pressing the <Previous soft key will change the display to the previous area.
5.Press the <Exit soft key to return to idle text.
5.The top line indicates that you are still in View Point Status mode. The second line will display the point text.
Pressing the Next> soft key takes you to the next point in the area whereas the <Previous soft key will take you to the previous point in the area.
To view the status of a point, press the Status> soft key.
6.After pressing the Status> key, the command center will display the following information:
View Point Status
Use this function to identify the number or location of each point in an area, and to show the current condition of any point you select.
1.Ensure your keypad shows idle disarmed text.
2.Press the Menu> key to enter the Command Menu.
3.Press Next> repeatedly until you reach the VIEW PT STATUS ?> prompt.
Press the adjacent soft key.
4.In this example, Area 1 is the area and there are eight points assigned to area 1 that can be viewed.
Press the Next> soft key to view the first point in the area; press the <Previous soft key to view the last point in the area. You may press the <Exit soft key at any time to exit this function.
Refer to Table 5 for more information.
Table 5: Screen Area Definitions
|
|
|
|
|
Line | Area Name | Definition |
| |
# |
|
|
|
|
|
|
|
| |
1 | Area # | This may display numbers 1 to 8. | ||
| Pt # | This may display point numbers 1 | ||
|
| to 127 and 129 to 247, | ||
2 | (Point | Normal |
| indicates that the point |
| State), HW |
|
| is not in the faulted |
|
|
|
| state. |
|
| Open |
| indicates that the point |
|
|
|
| is in an open state. |
|
| Short |
| indicates that the point |
|
|
|
| is in a shorted state. |
|
| Missing |
| indicates that the point |
|
|
|
| is missing. |
Bosch Security Systems 9/04 50410D | 69 |