D1260/D1260B Owner's Manual Part III: Advanced Commands - CHANGE TIME/DATE (COMMAND + 4 + 5)

CHANGE TIME/DATE (COMMAND + 4 + 5)

The time and date in your system must be correct for scheduled events to occur at the correct times. Check the time at least once a month to ensure accuracy. Use this function to set both the time and date. The system uses a 12-hour, AM/PM format. There is the option to continuously display the time and date in place of area status. The Time and Date will be shown continuously until a new command is entered or the current area’s status has changed. See CHANGE DISPLAY (COMMAND + 4 + 9), Time/Date Display for more information.

1.Ensure your keypad shows idle disarmed text.

2.Press the COMMAND key. The display shows *System Command*.

3.Press the 4 and then the 5 key.

If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function.

Press the MENU> soft key to enter the

Command Menu.

Press NEXT> soft key repeatedly.

When you reach the CHG TIME/DATE ?> prompt, press its adjacent soft key.

4.The display changes to Enter new time:

To just change the date, press the Set Date> soft key, See Step 6.

If you input the wrong time, press the <Exit soft key to clear the time.

Enter the new time using a 12-hour (HH:MM) format.

Ex: If the desired time is 12:34, press 1 + 2 + 3 + 4

The Set Date> soft key will disappear when the first digit is entered.

Press the Enter> soft key or the [ENTER] button.

5.The display changes to show AM> or PM> soft keys.

Press the AM> soft key to select AM. Press the PM> soft key to select PM.

6.The display shows Enter new date:

See Step 9 for use of the Time/Date Display> soft key.

If you input the wrong date, press the <Exit soft key to clear the time.

40

Bosch Security Systems 9/04 50410D