D1260/D1260B Owner's Manual Part III: Advanced Commands - SEND REPORT ? (COMMAND + 4+1 or 4+2)
If you prefer, you may use the Command Menu in place of steps 2 and 3 to initiate this function.
Press the MENU> soft key to enter the
Command Menu.
Press NEXT> soft key repeatedly.
When you reach the SEND REPORT ?> prompt, press its adjacent soft key.Another menu appears allowing for the selection of sending a test report (Test Rpt?>) or a status report (Status Rpt?>). Press either one of the adjacent soft keys.
4.The keypad displays Sending report… Please wait… until the report is transmitted to the security company.
5.When the transmission is complete the keypad displays Report sent for 5 seconds.
If the <Exit soft key is pressed before 5 seconds have elapsed, idle text will be displayed.
The display returns to idle text.
6.If the test (or status) report doesn‘t successfully transmit to the central station, the keypad may sound a trouble tone and display Comm Fail Route Grp# (# =
Bosch Security Systems 9/04 50410D | 37 |